Home > Automotive Industry

Extreme Reliability That Moves the Automotive Industry Forward.

Jet Edge waterjet systems and pumps deliver fast, clean, and highly reliable cutting for automotive components from safety systems to interior materials while supporting automated production and eliminating heat distortion or material compromise.

We Understand Automotive Manufacturing Challenges

Automotive manufacturing demands speed, flexibility, and consistency at scale. From automated production lines and robotic trimming cells to cutting advanced materials for safety and interior components, manufacturers must deliver precision without slowing production. Jet Edge waterjet systems are engineered to meet these demands—helping improve quality, reduce costs, and keep operations running continuously at full speed.

High Volume Production
High-Volume Production Demands

See the Jet Edge Solution

Automation Integration & Robotic Precision

See the Jet Edge Solution

Equipment Downtime & System Reliability

See the Jet Edge Solution

Material Distortion & Heat-Affected Zones (HAZ)

See the Jet Edge Solution

Secondary Operations
Secondary Operations & Tooling Costs

See the Jet Edge Solution

Pain Point: High-Volume Production Demands

Automotive manufacturers must maintain high throughput while ensuring consistent quality across every component. Any bottleneck or inconsistency can disrupt production schedules and increase costs.

Jet Edge Solution

Jet Edge systems are engineered for continuous operation and repeatable performance, enabling manufacturers to maintain fast cycle times while delivering consistent, high-quality results across high-volume production runs.

Pain Point: Automation Integration & Robotic Precision

Modern automotive production relies heavily on robotics and automated systems that demand tight tolerances and consistent repeatability.

Jet Edge Solution

Jet Edge systems integrate seamlessly into robotic and automated production environments, delivering precise, repeatable results—even across complex geometries and multi-angle cuts.

Pain Point: Equipment Downtime & System Reliability

In automotive manufacturing, the waterjet pump is the heart of the system. If it fails, production stops—impacting output, schedules, and profitability, especially in multi-shift operations.

Jet Edge Solution

Jet Edge’s ultra-reliable intensifier pumps are built for maximum uptime, featuring durable designs and simplified maintenance that keep systems running and minimize costly downtime.

Pain Point: Material Distortion & Heat-Affected Zones (HAZ)

Traditional cutting methods like laser or plasma introduce heat, which can distort materials, especially problematic for plastics, textiles, foams, and safety-critical components.

Jet Edge Solution

Jet Edge’s ultra-high-pressure cold-cutting technology eliminates heat-affected zones, preserving material integrity and delivering clean edges without melting, fraying, or warping.

Pain Point: Secondary Operations & Tooling Costs

Traditional trimming methods require expensive and long lead-time tooling like dies and often involve additional finishing steps—driving up costs and limiting flexibility when designs change.

Jet Edge Solution

Jet Edge waterjet systems eliminate the need to purchase, store, and maintain complex trimming dies and deliver clean, precise cuts that reduce or eliminate secondary operations—lowering costs while increasing production flexibility.

We Understand Automotive Manufacturing Challenges

Automotive manufacturing demands speed, flexibility, and consistency at scale. From automated production lines and robotic trimming cells to cutting advanced materials for safety and interior components, manufacturers must deliver precision without slowing production. Jet Edge waterjet systems are engineered to meet these demands—helping improve quality, reduce costs, and keep operations running continuously at full speed.

High Volume Production
High-Volume Production Demands

See the Jet Edge Solution

Pain Point: High-Volume Production Demands

Automotive manufacturers must maintain high throughput while ensuring consistent quality across every component. Any bottleneck or inconsistency can disrupt production schedules and increase costs.

Jet Edge Solution

Jet Edge systems are engineered for continuous operation and repeatable performance, enabling manufacturers to maintain fast cycle times while delivering consistent, high-quality results across high-volume production runs.

Automation Integration & Robotic Precision

See the Jet Edge Solution

Pain Point: Automation Integration & Robotic Precision

Modern automotive production relies heavily on robotics and automated systems that demand tight tolerances and consistent repeatability.

Jet Edge Solution

Jet Edge systems integrate seamlessly into robotic and automated production environments, delivering precise, repeatable results—even across complex geometries and multi-angle cuts.

Equipment Downtime & System Reliability

See the Jet Edge Solution

Pain Point: Equipment Downtime & System Reliability

In automotive manufacturing, the waterjet pump is the heart of the system. If it fails, production stops—impacting output, schedules, and profitability, especially in multi-shift operations.

Jet Edge Solution

Jet Edge’s ultra-reliable intensifier pumps are built for maximum uptime, featuring durable designs and simplified maintenance that keep systems running and minimize costly downtime.

Material Distortion & Heat-Affected Zones (HAZ)

See the Jet Edge Solution

Pain Point: Material Distortion & Heat-Affected Zones (HAZ)

Traditional cutting methods like laser or plasma introduce heat, which can distort materials, especially problematic for plastics, textiles, foams, and safety-critical components.

Jet Edge Solution

Jet Edge’s ultra-high-pressure cold-cutting technology eliminates heat-affected zones, preserving material integrity and delivering clean edges without melting, fraying, or warping.

Secondary Operations
Secondary Operations & Tooling Costs

See the Jet Edge Solution

Pain Point: Secondary Operations & Tooling Costs

Traditional trimming methods require expensive and long lead-time tooling like dies and often involve additional finishing steps—driving up costs and limiting flexibility when designs change.

Jet Edge Solution

Jet Edge waterjet systems eliminate the need to purchase, store, and maintain complex trimming dies and deliver clean, precise cuts that reduce or eliminate secondary operations—lowering costs while increasing production flexibility.

CASE STUDIES

Real Customers. Real Impact.

Case Study

Autoliv: Precision for Safety-Critical Components

Summary: A global leader in automotive safety systems needed a precise and repeatable cutting solution for airbags and other critical components made from specialized fabrics and materials. Jet Edge delivered a waterjet system capable of high-speed, highly accurate cutting without fraying or thermal damage.

Key Result: Achieved consistent, high-quality cuts for safety-critical components while improving throughput and reducing material waste ensuring reliability at scale where precision matters most.

Read More

Case Study

Alliance Automation: Flexible Cutting for Custom Applications

Summary: Alliance Automation required a cutting solution to support automated production lines handling a wide range of automotive materials and component geometries. Jet Edge provided a custom-configured waterjet system powered by ultra-reliable intensifier pumps, designed to integrate seamlessly into robotic trimming cells and eliminate the need for costly trimming dies.

Key Result: Enabled flexible, precise cutting across multiple materials and applications while improving efficiency and supporting scalable automation for their customers.

Read More

FEATURED EQUIPMENT

High-Performance Systems for Automotive Applications

From high-volume production lines to specialized cutting applications, Jet Edge systems deliver the speed, precision, and flexibility automotive manufacturers demand.

High Rail with Aquavision iQ - Jet Edge Waterjet Systems

High Rail Gantry System

Engineered for precision and scalability, the High Rail Gantry System delivers exceptional accuracy and throughput, making it ideal for high-volume automotive production and large-format cutting applications.

Hero Series of Pumps for Energy Industry

Hero Series of Pumps

Ultra-reliable, high-performance intensifier pumps designed to deliver consistent cutting power, maximize uptime, and support a wide range of automotive materials and production requirements.

Midrail Dual Carriage - Jet Edge Waterjet Systems

Custom Configured Solutions

Every automotive application is different. Jet Edge specializes in custom-configured systems designed to integrate seamlessly into your production line and meet your exact performance requirements.

Why Industry Leaders Choose Jet Edge

Customer Focused Support

At Jet Edge, our passion is Enabling Customer Success.  We take great pride in providing the best service and support in the industry.  We know that our success is completely tied to helping our customers succeed, and at a minimum, that means helping to ensure your Jet Edge equipment will be productive for the decades of its life.

Custom Configured Solutions

Jet Edge customizes solutions to fit your needs, not a one-size-fits-all model. By understanding your goals and challenges, we collaborate to design a system that optimizes quality, productivity, and ROI.

Accuracy, Precision & Repeatability

Our CNC waterjet cutting machines deliver unmatched accuracy, precision, and repeatability. With 100% ball screw-driven axes and an isolated catch tank to prevent vibration, every detail is designed for peak performance. We focus on the little things because they make a big difference—ensuring reliability and excellence in every cut.

Reliability & Durability

Jet Edge designs and builds lasting solutions with heavy-gauge steel components and a unique 3-layer cross-grid tank support. Our labyrinth seals, air purge system, and steel way covers protect all drive axes. Customers rave about the incredible durability of Jet Edge equipment—see why it stands the test of time.

Additional Resources

Your Guide to Better Cutting Outcomes.

Explore how waterjet technology is improving precision, efficiency, and versatility in manufacturing environments across industries.

BLOG

The 4-Pillars of High-Volume Waterjet Cutting - Introduction

Explore how waterjet technology delivers clean, precise cuts in tough materials like stainless steel, titanium, and specialty alloys without heat-affected zones, material distortion, or secondary finishing.

Read More

BLOG

Die Cutting vs. Waterjet Cutting

Compare die cutting and waterjet cutting to determine the best fit for high-volume part production. Explore the advantages, limitations, and cost considerations of each process to make informed manufacturing decisions.

Read More

BLOG

Other Applications (non-cutting) of Ultra-High-Pressure (UHP) Water

Compare cutting technologies to determine the best fit for your metal fabrication needs. Learn how waterjet stacks up in terms of precision, versatility, and material integrity across a range of applications.

Read More
Why Waterjets Made in America Are More Important Than Ever

BLOG

Why Waterjet Systems ‘Made in America’ Are More Important Than Ever

Discover how U.S.-manufactured waterjet systems provide superior reliability, serviceability, and long-term value for automotive manufacturing.

Read More

Let’s Talk Waterjet Solutions for Automotive

Whether you’re optimizing high-volume production, integrating automation, or exploring new cutting capabilities, Jet Edge is ready to help. Our experts understand automotive manufacturing and will work with you to find the right solution for your operation.